Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Greyhound rv
Almost done building the pack for my bus.

I was going to do this and after seeing the 4x

I have decided on this 4 by 20 cells

I found it so much easier to get solder on the battery first, then reheat to get the fuse into the solder.

Batteries are all tined ready for bus bars and fuses.
Going to use the 3 wire twist with 12 awg
Looks good
Positives are done and one negative.

the actual fuse wire is much easier to bend than wire edm wire.

hbpowerwall likes this post

6awg way to big, the 8awg are in the mail box.
2 hrs till i know how they fit.

The china 300 watt is way to big, i would recommend the 100 watt

Checked out the 8 awg ring terminals and they fit perfect with a .190" id

The 6awg have a .230 id

Somehow i ordered non plated the second time.
hbpowerwall and Korishan like this post

It didn't like 10 amps

Its up and running and should be between 2kw and 2.5kw
Korishan likes this post
That all seems to come along nicely!
What are you planning on isolation when you place it in the RV?

I want to place the first pack I'm making in our own RV.
What about the BMS?
Greetz Dennis

Current Of-grit setup
5 230Wp canadian Solar panels
2 Voltmaster 270Ah 12V Battery's
1 Outback flexmax80
1 Phoenix 3000 inverter

Just change the tip on the iron to one that is smäller in the top
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcoming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Im going to sandwich it between 2 sheets of plywood and store it under the clutch.

bms is built into the sbms100

I think i can just grind the tip of the soldering iron down.
I did one under the couch in a friends bus. Was nervous about air flow and someone spilling drinks though..looks good man. Why did you by copper instead of smashing some tubing to make your own eyelets? How's that iron treating you? I plan an in depth side by side review of tools very soon, just eating to get my big torch in..

Who read this thread?
100 User(s) read this thread:
hbpowerwall, AZ_Tekkie, daromer, mike, goodnowm, BigBen, owitte, opus40, dakoal, coolfx, Herebus, Korishan, PAF, Prahe86, BobinTN, egam, Alec_J, Droid126, eAnic, jdeadman, wim, wimpie007, frnandu, typ49, KD0CAC, HandyAndy, The-J-Man, Tommy Ng, Christian, Jeremy Choy, 1958 greyhound, kktuo, watts-on, Dan Lim, jesusangel, BamBamsBatteries, Daggerzz, Hanssing, MetalFang, autobd, IronSky, DrkHrs13, silverse2m6, quake101, ismaildoganw, kazbach, Stefaan De Ridder, AzJames, Chiptosser, Chicken, Michel Daggelinckx, Inverted 18650, BlueSwordM, Dennis Van Hoek, Cobra, alildabldo, Happy Camper Homesteader, brafi, Stew Mohr, Nitroghost, John.Siler, N00bPwr, Sun plumber, Robert Crawley, KtB, Travis Watson, al4sound, Seedser, paraskevas, Mazlem, ivnz, Geek, mike98, Kenneth Bonanno, WildCard_25, FischTech, p0lar, AlexCPU, abhijithym, hookemdevils22, NaoDarkness, Pierre, ahillqck, Ginger Yang, Charly144, jgluch, Andrew Bleser, Ezra Scholten, Dala, ARLISS, advancedservers, Jmp, dagabu, Sholphin02, Walde, yoeri_w, Kevin Mason, camaya6, Powermad00, wesbowhunts

Forum Jump:

Users browsing this thread: 1 Guest(s)