Thread Rating:
  • 7 Vote(s) - 4.86 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HBPowerwall (Official)
(10-04-2018, 05:27 AM)Haslero Wrote: awesome printer, reducing the speed in the first layer helped me alot.
You can also use a metal sheet with a very smooth surface that you can bend to remove the prints better. 
Very good idea from the prusa printers.

ABS is awesome. Some of the polycarbon mixes make durable parts. Try taking (a day before) some scrap shavings of ABS and drop them into an empty plastic Advil bottle with some Acetone, enough to just fill it. Seal the cap and shake into a slurry. At the start of heating - paint your printbed area where your part will appear  and you'll have no issues with lifting.

The only thing that worked for me about layer splitting on big parts was to enclose the print area ceiling and side walls to enclose heat and deflect cooling gusts of air. 

PLA is great too but use in Sunlight and overall durability - I'll use ABS  
Slurry will stick to heated blue tape or Kapton as well.
Reply
mannnnnnnnnn soooo much to catch up on! darn cool stuff!
Reply
Kept busy this weekend cleaning up some cabling in the power shed, using the iCharger X6 to help balance my bank a little quicker - dam that little charger impresses me! If anyone has any ideas on cable runs let me know.. A quick vid of my thoughts how it should be done but i'm sure someone out there has some better idea's than me lol 


Chris6S likes this post
If you'd like to support the forum please feel free to use my affiliate links to purchase all kinds of stuff for your projects 
Amazon - https://amzn.to/2qURmH2
eBay - https://goo.gl/6mrQHH 
Aliexpress - http://s.click.aliexpress.com/e/bNLW537E
Banggood -  https://goo.gl/FF2v6W
Battery Hookup - http://bit.ly/2Oe9PLW 
Reply
Watchmon 5 & Watchmon 6 Hands-on with Jaron Ware from Batrium - good looking piece of kit with a fair amount of testing to go before release! Also an M5Stack display - you can get one here - https://www.ebay.com.au/itm/New-M5Stack-...2749.l2649 

If you'd like to support the forum please feel free to use my affiliate links to purchase all kinds of stuff for your projects 
Amazon - https://amzn.to/2qURmH2
eBay - https://goo.gl/6mrQHH 
Aliexpress - http://s.click.aliexpress.com/e/bNLW537E
Banggood -  https://goo.gl/FF2v6W
Battery Hookup - http://bit.ly/2Oe9PLW 
Reply
Some photos of the MPT-7210a mainboard

If you'd like to support the forum please feel free to use my affiliate links to purchase all kinds of stuff for your projects 
Amazon - https://amzn.to/2qURmH2
eBay - https://goo.gl/6mrQHH 
Aliexpress - http://s.click.aliexpress.com/e/bNLW537E
Banggood -  https://goo.gl/FF2v6W
Battery Hookup - http://bit.ly/2Oe9PLW 
Reply
dear

j have a question .
for pip inverter and 14s80p2p please send me a bulk and floating voltage you have set .
thanks
paolo
emuland-metroman likes this post
Reply
(12-19-2018, 10:57 AM)pipap Wrote: dear

j have a question .
for pip inverter and 14s80p2p please send me a bulk and floating voltage you have set .
thanks
paolo

peter know for sure how to set PIP inverter for 18650 charging
Building Lifepo4 Powerwall - atm 1400 cells growing

Reply


This video has a bunch of my settings .. might help Smile
Chris6S likes this post
If you'd like to support the forum please feel free to use my affiliate links to purchase all kinds of stuff for your projects 
Amazon - https://amzn.to/2qURmH2
eBay - https://goo.gl/6mrQHH 
Aliexpress - http://s.click.aliexpress.com/e/bNLW537E
Banggood -  https://goo.gl/FF2v6W
Battery Hookup - http://bit.ly/2Oe9PLW 
Reply


This video has a bunch of my settings .. might help Smile
BlueSwordM and camthecam like this post
If you'd like to support the forum please feel free to use my affiliate links to purchase all kinds of stuff for your projects 
Amazon - https://amzn.to/2qURmH2
eBay - https://goo.gl/6mrQHH 
Aliexpress - http://s.click.aliexpress.com/e/bNLW537E
Banggood -  https://goo.gl/FF2v6W
Battery Hookup - http://bit.ly/2Oe9PLW 
Reply
Thanks Peter for all you share, I think you are a good source of inspiration for many people.
LEDSchlucker, hbpowerwall, camthecam like this post
Reply


Who read this thread?
100 User(s) read this thread:
hbpowerwall (02-01-2019, 08:56 PM), Azza9990999 (10-14-2017, 10:28 PM), One up the sleeve (07-19-2017, 12:15 AM), Remixd (05-21-2018, 11:37 PM), AZ_Tekkie (06-03-2018, 03:11 PM), Chickey (09-05-2017, 02:01 PM), Brian Lawrence (07-19-2017, 07:35 AM), ShaneE (05-31-2017, 05:41 AM), pacm31 (09-29-2017, 02:31 PM), Minx (05-31-2017, 04:08 AM), daromer (12-29-2018, 08:10 PM), Minatugar (05-24-2018, 10:27 PM), Sean (12-29-2018, 06:51 PM), mike (12-19-2018, 12:55 PM), DIY TESLA POWER WALL (03-28-2017, 08:41 PM), ote (08-13-2017, 03:27 PM), 18650Shrink (02-18-2018, 09:25 PM), goodnowm (03-07-2018, 01:27 AM), Swolrath (07-19-2017, 08:41 AM), AveRageJoe (09-04-2018, 06:01 PM), BigBen (09-12-2018, 06:02 PM), station240 (06-22-2018, 02:39 PM), Chris (03-11-2017, 09:31 PM), PaulKennett (05-14-2018, 12:17 PM), RobPethybridge (10-08-2017, 04:48 AM), Joaquinsfy (06-13-2018, 12:26 PM), NiVa (07-18-2017, 10:39 PM), Lux_Gamer (02-04-2018, 11:11 AM), askmike72 (01-16-2019, 10:12 AM), Andreas Kvernes (10-01-2017, 01:28 PM), owitte (06-13-2018, 02:13 PM), opus40 (01-17-2019, 06:47 AM), RudyLiPower (09-08-2017, 12:53 AM), Loboosh (07-19-2017, 12:57 AM), SeattlePowerwall (03-29-2017, 03:31 AM), ken (07-27-2017, 08:04 AM), OfGrid Ausie Preper (03-03-2017, 11:25 PM), dakoal (11-13-2018, 04:59 PM), VdVoort4 (02-19-2018, 12:53 PM), Grazor (05-24-2017, 12:42 PM), Bassiexp (03-28-2017, 08:01 PM), Majorphill (10-08-2018, 11:20 AM), Elwood (11-26-2018, 01:42 AM), frasernator (11-09-2017, 05:17 PM), dobbers (05-26-2017, 10:37 AM), riveracc1 (08-19-2017, 04:03 AM), mikesdiypowerwall (03-29-2017, 03:27 AM), spj007 (07-22-2018, 12:51 AM), coolfx (11-08-2017, 12:51 PM), nexsuperne101 (11-15-2018, 05:10 PM), Antairus (02-10-2017, 10:34 PM), gulik154 (05-12-2017, 08:19 AM), cgrauls (11-09-2017, 05:52 PM), Herebus (08-08-2017, 04:26 AM), Pm240sx (02-18-2017, 12:50 AM), CUDAcores89 (03-03-2018, 09:32 AM), anishkgt (05-13-2018, 06:42 PM), JapanPowerWall (08-28-2018, 01:25 AM), cayrex (08-16-2018, 07:22 PM), timholmesjr (07-02-2018, 01:28 PM), Rerouter (04-20-2017, 10:11 AM), BatteryDIY (10-30-2017, 06:38 PM), Battery (10-21-2018, 11:10 AM), Terry Texas (08-25-2017, 05:30 AM), DanielD (05-01-2017, 06:06 PM), ruby2 (01-21-2018, 08:27 PM), TrueGeek (03-28-2017, 11:42 AM), JustJim (09-27-2017, 02:36 PM), Dtec45 (02-04-2018, 11:23 AM), Korishan (01-22-2019, 01:39 PM), A + A (07-12-2018, 06:54 AM), P.Tasyo Powerwall (02-01-2018, 04:10 PM), PAF (01-24-2019, 02:23 PM), brettwatty (10-28-2018, 06:34 AM), FERCSA (06-10-2018, 03:24 PM), rumey (03-29-2017, 08:49 AM), Prahe86 (09-01-2017, 11:00 AM), nikitto (04-01-2017, 06:22 PM), Janis (04-20-2017, 06:59 PM), Nemo90 (03-27-2017, 03:46 PM), FireFrog (02-22-2017, 09:32 PM), BuddyNorth (05-07-2017, 02:58 AM), pfromero (02-18-2017, 10:14 PM), Aspendell (02-12-2017, 01:23 AM), Asylumweb (03-28-2017, 10:39 AM), graverl (07-20-2017, 04:15 PM), BitcoinTrader (06-12-2018, 06:16 AM), theDIYHobbyist (03-29-2017, 12:46 AM), Yves (02-18-2017, 11:21 PM), Bob Muster (02-26-2017, 04:36 AM), Pappy Bear (01-01-2018, 10:42 AM), Jose Reyes (09-09-2017, 08:48 PM), Zensay (06-12-2017, 09:09 PM), Franky Beuselinck (05-13-2017, 09:45 PM), Gazza (02-13-2017, 07:02 PM), Aaron Anderson (02-26-2017, 03:41 PM), steve (02-19-2017, 01:11 PM), Batrium (11-13-2018, 06:37 AM), Darmok (09-19-2017, 05:58 AM), Wattsup (02-15-2018, 11:07 AM)

Forum Jump:


Users browsing this thread: 4 Guest(s)