Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hey Everyone from Massachusetts
#1
Hey everyone I'm new to the forum from Massachusetts in the USA. I've been planing to build a power wall of sorts for a while now and it have finally begun working on it. I have been watching a lot of AveRage Joe's and HBPowerwall's videos on YouTube gathering information on exactly how I'd like to set mine up. A little bit about myself, I'm a 23 year old electromechanical engineer and currently work for a small engineering company. I'm looking forward to talking and collaborating with everyone on the forum. Here's a few screen captures from SolidWorks of my current pack design I'm going to do a test fit tomorrow where I can laser cut the Acrylic holders. These packs will be packs of 100 18650 cells. I put provisions in the holders for Longmon mounting and holes for zip ties to hold down the bus bars, I'm sure there will be plenty of tweaking to do before I come up with a final design. Any input is greatly appreciated! 


 
 
Wolf likes this post
Reply
#2
Hello and welcome to the forum.
Nice to have another New Englander on board.
I'm just up the road a bit.
Love your acrylic cell holder design.
Looking forward to see your project grow.

Wolf
If 18 X 650 = 2200+mAh then we have power! 
May all your Cells have an IR of 70mΩ or less Smile
Last count as of 3/22/2019
Total Number of Cells           3679
Cells  >80% of Capacity        2389
Cells <80% of Capacity         1265
Cells ≥2200mAh & ≥ 80%     1653
Google Drive for info https://drive.google.com/drive/folders/1...sp=sharing
Not your average Wolf       
            Cool



Reply


Who read this thread?
14 User(s) read this thread:
Sean, mike, watts-on, Geek, cadric, choncy12, Riplash, Wolf, Dallski, Solardad, kronos, JimU, JBonesaw, Owen96

Forum Jump:


Users browsing this thread: 1 Guest(s)