Mikethezipper
Member
- Joined
- Jul 7, 2018
- Messages
- 121
I've started making packs per the method I have been seeing used per HBpowerwalls and Daromer's method - but I'm wondering if there is a stronger method to make these.
What I've got is a thick buss wire that's attached by nothing but tiny 36awg wire to the pack. I've used some hot glue to give it some strength, but that doesn't give it much extra strength, and still leaves us with the issue that the buss wires aren't really structurally attached to the pack.
Also, anyone come up with a way to protect the fuse wires? I'm wondering if anyone has designed something that raises up the edges of the cell holders to be taller than the buss wires so that when a pack is laying on something, it won't be putting any stress on the fuse wires.
What I've got is a thick buss wire that's attached by nothing but tiny 36awg wire to the pack. I've used some hot glue to give it some strength, but that doesn't give it much extra strength, and still leaves us with the issue that the buss wires aren't really structurally attached to the pack.
Also, anyone come up with a way to protect the fuse wires? I'm wondering if anyone has designed something that raises up the edges of the cell holders to be taller than the buss wires so that when a pack is laying on something, it won't be putting any stress on the fuse wires.