Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My Wall of Power
#81
How does your system work with your enphase setup? Do the micro inverters fire up without the grid?
Reply
#82
Very impressive... the 3D printed parts really take it to another level.
Reply
#83
No new updates on the power system, but have made some more progress on my power shed.

Korishan and gregoinc like this post
Off Grid Setup
3 - 320watt 24v Panels - MPPSolar 2424LV-MSX - 672 Cell 96p7s 5.5kw Power Wall

Retired pack 2kw 420 Cell

On Grid Setup
44 - 250 Watt Panels with Enphase micro inverters
Reply
#84
(06-11-2017, 09:25 PM)AZ_Tekkie Wrote: And we're live.  Made one design flaw though, the batteries stick out further than i anticipated and interfer with the door on the cabinet closing and locking.  I'll have to do some slight fabrication to the door to get it back in working order.


What box is that?  I like it!
Reply
#85
(08-01-2018, 05:13 PM)CrankyCoder Wrote:
(06-11-2017, 09:25 PM)AZ_Tekkie Wrote: And we're live.  Made one design flaw though, the batteries stick out further than i anticipated and interfer with the door on the cabinet closing and locking.  I'll have to do some slight fabrication to the door to get it back in working order.

What box is that?  I like it!

You just need to find a electrical supplier that sells used and wholesale electrical stuff.
CrankyCoder likes this post
Off Grid Setup
3 - 320watt 24v Panels - MPPSolar 2424LV-MSX - 672 Cell 96p7s 5.5kw Power Wall

Retired pack 2kw 420 Cell

On Grid Setup
44 - 250 Watt Panels with Enphase micro inverters
Reply
#86
Thumbs Up 
(03-19-2017, 12:34 AM)AZ_Tekkie Wrote: My latest creation.  3d printed a case to house my volt meters.

Love your work man.   I was wondering if you could show us how your wired your 7S battery monitor box to the RJ45 connector and how you wired the ethernet cables?  Thanks alot
Reply
#87
(09-10-2018, 04:47 PM)WebmasterHJ Wrote:
(03-19-2017, 12:34 AM)AZ_Tekkie Wrote: My latest creation.  3d printed a case to house my volt meters.

Love your work man.   I was wondering if you could show us how your wired your 7S battery monitor box to the RJ45 connector and how you wired the ethernet cables?  Thanks alot

Thanks.  I no longer use this to monitor cell voltage, switched over to using the batrium bms.  I can't recall how exactly i wired it, but just went pin to pin.  7 cells so you have pin 1 negative most and then the next 7 pins go to each cell bank.
WebmasterHJ likes this post
Off Grid Setup
3 - 320watt 24v Panels - MPPSolar 2424LV-MSX - 672 Cell 96p7s 5.5kw Power Wall

Retired pack 2kw 420 Cell

On Grid Setup
44 - 250 Watt Panels with Enphase micro inverters
Reply
#88
(03-19-2017, 12:34 AM)AZ_Tekkie Wrote: My latest creation.  3d printed a case to house my volt meters.


Thingiverse link: http://www.thingiverse.com/thing:2187073

Came across your thread, love the build, and volt meter setup. Have been searching for a meter like the one at the very top. Any chance you could share where you sourced it from?
hbpowerwall likes this post
<<< Contact me for quality used Yuasa LEV40 and LEV50 prismatic lithium batteries in Australia >>> eBay Link Here
Reply
#89
If you go to the thingiverse link, it lists what all was used to make that meter.
hbpowerwall likes this post
Off Grid Setup
3 - 320watt 24v Panels - MPPSolar 2424LV-MSX - 672 Cell 96p7s 5.5kw Power Wall

Retired pack 2kw 420 Cell

On Grid Setup
44 - 250 Watt Panels with Enphase micro inverters
Reply


Who read this thread?
100 User(s) read this thread:
hbpowerwall, Remixd, AZ_Tekkie, Chickey, Brian Lawrence, daromer, Minatugar, Sean, mike, 18650Shrink, goodnowm, Swolrath, AveRageJoe, BigBen, station240, PaulKennett, Joaquinsfy, 49er, NiVa, Lux_Gamer, mouserat, Andreas Kvernes, owitte, opus40, miwall, VdVoort4, Glubux, Grazor, Majorphill, Elwood, riveracc1, coolfx, gulik154, Herebus, CUDAcores89, timholmesjr, Rerouter, smorgon, BatteryDIY, DanielD, ruby2, JustJim, Korishan, A + A, P.Tasyo Powerwall, PAF, brettwatty, FERCSA, rumey, Prahe86, Janis, pfromero, theDIYHobbyist, Bob Muster, Pappy Bear, Zensay, Franky Beuselinck, Batrium, Darmok, Wattsup, Scepterr, eeesOap, Elmo, Project, Batteriapan, ozz93666, BobinTN, Tristan Timmer, Iordanis Kouroutsidis, hellfire88no, Felineman, memloc, Frnandu Martiński, oni, egam, skyfridge, CrankyCoder, tchipperfield, Alec_J, Mike C, Droid126, HogensHero, eAnic, Donald Broussard, jdeadman, footgoo, charlie246, camils, crud, Zagy, 2146, Dannie B Hansen, wim, hugo5464, wimpie007, coconut2k13, MajStealth, ericg, Joe Farrugia, frnandu

Forum Jump:


Users browsing this thread: 1 Guest(s)