Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Nishi no-solder compression pack-building kit from India
#21
I'm not really set up to measure the amps passing through the buses, or measuring the amount of heat that is generated as the amps are increased. I have sent some to a friend, and when he tests these, I will post his findings. I have verified that the bus-strips are indeed copper core with a zinc plating for anti-corrosion protection.





A couple more pics...the materials off to the left are 1/4-inch plywood, and 1/4-inch HDPE (kitchen cutting board). Either one could be used to make compressive side panels to hold and protect the assembled pack.

 
Reply


Who read this thread?
100 User(s) read this thread:
daromer (06-20-2018, 04:01 PM), mike (08-07-2018, 05:54 PM), Majorphill (08-03-2018, 03:53 AM), Korishan (08-02-2018, 11:51 AM), A + A (05-12-2018, 06:55 PM), PAF (07-18-2018, 02:54 PM), ozz93666 (06-21-2018, 06:32 AM), chriskool59 (08-05-2018, 12:09 AM), jdeadman (08-02-2018, 09:24 PM), wim (08-02-2018, 08:15 AM), typ49 (08-02-2018, 08:22 AM), Christian (08-15-2018, 09:56 PM), watts-on (08-02-2018, 08:50 AM), Dan Lim (09-05-2018, 09:22 AM), jesusangel (07-20-2018, 07:59 PM), Davel (05-20-2018, 12:50 PM), Stefaan De Ridder (07-18-2018, 12:56 PM), BlueSwordM (08-07-2018, 07:16 AM), idiomatically (08-08-2018, 10:02 AM), Eric Koshinsky (06-23-2018, 12:29 AM), KtB (08-07-2018, 07:14 AM), ivnz (07-18-2018, 11:14 PM), Geek (08-02-2018, 07:41 AM), Rad (05-14-2018, 02:10 AM), SWEwall (05-12-2018, 09:23 PM), Jon (06-22-2018, 09:51 AM), floydR (07-18-2018, 10:29 PM), Grumplestiltskin (06-30-2018, 07:30 AM), Lucian Macota (08-16-2018, 09:36 AM), rev0 (07-19-2018, 08:30 PM), okent (06-28-2018, 05:22 PM), CarelHassink (05-12-2018, 12:58 PM), hro413862 (07-19-2018, 11:30 AM), bigblue (07-19-2018, 08:19 PM), Charly144 (05-12-2018, 03:47 PM), djuro (07-18-2018, 11:31 AM), Detritalgeo (05-12-2018, 07:30 PM), ClardiPower (06-04-2018, 08:03 AM), BaronVonChickenPants (05-15-2018, 11:30 AM), spinningmagnets (08-04-2018, 05:57 AM), cosmic (06-06-2018, 08:01 PM), acidice333 (06-22-2018, 02:33 AM), Jason Morris (08-02-2018, 06:27 AM), brwainer (08-02-2018, 06:51 AM), drchips (07-19-2018, 08:19 AM), Brent (05-25-2018, 01:43 PM), aashay2035 (07-07-2018, 03:39 PM), gregoinc (08-02-2018, 10:53 AM), costty (05-21-2018, 10:19 AM), gpn (05-14-2018, 04:02 AM), Chablis_m (06-22-2018, 01:09 PM), Headrc (05-13-2018, 03:16 PM), alberta offgrid (05-12-2018, 02:41 PM), Riffraff (06-05-2018, 01:49 PM), John Allen (07-02-2018, 03:48 AM), thanar (05-17-2018, 06:52 AM), Dala (08-02-2018, 07:09 AM), DK100 (05-15-2018, 05:56 AM), DonaldBitterman (06-20-2018, 05:17 PM), Crimp Daddy (07-18-2018, 03:32 PM), Matman (05-13-2018, 04:48 AM), Redpacket (05-12-2018, 11:48 AM), Shannon Williams (06-20-2018, 06:49 AM), completelycharged (06-22-2018, 02:24 AM), Ibiza (08-02-2018, 06:51 AM), Stephen Ryan (05-15-2018, 01:45 PM), robunger (05-12-2018, 11:30 PM), davidtrn24 (08-27-2018, 03:59 AM), solar_18650 (07-19-2018, 07:07 PM), thunderheart (07-19-2018, 11:13 PM), Curryx (05-18-2018, 02:11 PM), kpiep (05-18-2018, 07:12 PM), farmerjohn (05-13-2018, 12:03 AM), indigo (06-22-2018, 03:50 PM), ANegron (05-13-2018, 03:07 AM), strachank (05-14-2018, 09:38 AM), Cr500 (05-24-2018, 03:57 PM), choncy12 (05-23-2018, 06:14 PM), Bubba (07-19-2018, 08:01 PM), marcusg101 (05-20-2018, 08:52 AM), JDish (05-14-2018, 09:23 PM), NiallDarwin (05-13-2018, 04:15 AM), CBlack (06-24-2018, 10:16 PM), Fjasken (05-14-2018, 07:19 PM), blueornge (05-15-2018, 02:48 PM), roswitha mamutschka (05-16-2018, 03:44 PM), Sholphin02 (07-18-2018, 11:14 PM), Юрий Маркович (05-22-2018, 01:26 PM), Unleashed (06-22-2018, 04:20 PM), Ricky Latarche (06-25-2018, 02:18 PM), Ebikemadness (06-24-2018, 01:28 PM), Riplash (08-02-2018, 03:02 PM), 100fuegos (05-31-2018, 07:39 PM), videovic (06-11-2018, 08:07 PM), polargeek (06-09-2018, 06:16 PM), Bart (06-29-2018, 09:20 PM), Katarn_89 (07-22-2018, 06:57 PM), EP3R-T (07-10-2018, 06:43 PM), albach (06-20-2018, 02:51 PM), redcane (06-22-2018, 03:22 AM)

Forum Jump:


Users browsing this thread: 1 Guest(s)