Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pack Design Question
#2
No individual fusing on new cells on that small pack with that current is needed if you ask me.
Just use a proper BMS

You will have 40 cells in parallel. And if you say you have 10A total thats 10/40 = Your current per cell. Thats rather low Smile
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcoming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Reply


Messages In This Thread
Pack Design Question - by Ebarnett - 03-01-2019, 03:29 PM
RE: Pack Design Question - by daromer - 03-01-2019, 03:37 PM
RE: Pack Design Question - by Ebarnett - 03-01-2019, 03:57 PM
RE: Pack Design Question - by Wolf - 03-01-2019, 04:23 PM
RE: Pack Design Question - by Ebarnett - 03-01-2019, 04:48 PM
RE: Pack Design Question - by Wolf - 03-01-2019, 06:11 PM
RE: Pack Design Question - by Ebarnett - 03-01-2019, 06:17 PM
RE: Pack Design Question - by Dan Lim - 03-02-2019, 05:47 AM
RE: Pack Design Question - by Ebarnett - 03-03-2019, 03:00 PM
RE: Pack Design Question - by Wolf - 03-03-2019, 04:02 PM

Who read this thread?
63 User(s) read this thread:
daromer, Sean, Korishan, PAF, wim, watts-on, Dan Lim, Stefaan De Ridder, BlueSwordM, Mazlem, Geek, Grumplestiltskin, ChrisD5710, Oz18650, rodagaster, Ibiza, Zvonko000, cadric, choncy12, Riplash, Mikethezipper, clupton, Shawndoe, risoman, Wolf, camthecam, Generic, Speicher, Manju18, PaulDane, BmoreThor, kevinjaye, LEDSchlucker, zoookii, 1Lukas1, Powersaver, kurt13r, Richard, mskip, beserker786, kophi, mxboy27s, Havskum, strat24v, Greenbatt, CU17, Ebarnett, allend83, piedranet, 100kwh-hunter, Bilabob, Kenjutsu, GeneralDJ, MonkeyThink, zoneblue, elettri, sgrevskott, agungprm, ocorrea73, Zaziki, ben teker, Ada_Lithium, foamovercast

Forum Jump:


Users browsing this thread: 1 Guest(s)