Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Powering with 4.8V
#1
I encountered a problem from someone: he wants to use li-ion cells to power a small motor that works at 4.8V.
Problem is that a single cell would be too low and 2 in series would be too high.

I'm thinking of recommending him using 2 cells in series and something like this:

http://www.datasheetcafe.com/mp23070n-da...regulator/

The objective is to have as little loss in the conversion as possible. Is that good or are there better solutions ?
Reply


Messages In This Thread
Powering with 4.8V - by Overmind - 05-17-2019, 11:24 AM
RE: Powering with 4.8V - by Redpacket - 05-17-2019, 12:01 PM
RE: Powering with 4.8V - by Korishan - 05-17-2019, 12:09 PM
RE: Powering with 4.8V - by 100kwh-hunter - 05-17-2019, 05:33 PM
RE: Powering with 4.8V - by Redpacket - 05-18-2019, 03:56 AM
RE: Powering with 4.8V - by Overmind - 05-20-2019, 11:38 AM

Who read this thread?
36 User(s) read this thread:
daromer, Sean, Korishan, PAF, watts-on, Stefaan De Ridder, BlueSwordM, Geek, ChrisD5710, djuro, jonyjoe505, Redpacket, Ibiza, Oliman, thunderheart, Bubba, Cherry67, Riplash, 100fuegos, Jim Jr., Katarn_89, w0067814, emuland-metroman, Shawndoe, Wolf, Bastler_Ro, Lekr, Solardad, ajw22, mart1nn, Overmind, ma3006he, Rubert, 100kwh-hunter, juanjo57, Wulffi

Forum Jump:


Users browsing this thread: 1 Guest(s)