Jeremy Choy
Member
- Joined
- May 10, 2017
- Messages
- 60
I'll be using The 7210A to charge up my pack since it will be a small system (520watt system) and a grid tie inverter with limiter.
I have anESP32 on order to see if I can a) monitor voltages (14s) and b) create a discharge circuit of around .75 - 1.0 amps
ESP32:https://learn.sparkfun.com/tutorials/esp32-thing-hookup-guide
How to read multiple analog Read sensors (should apply to voltage readings i think):https://forums.adafruit.com/viewtopic.php?f=25&t=11597&start=60
Discharge circuit:
Good idea?has any one tried these methods or have had success/failures?
I have anESP32 on order to see if I can a) monitor voltages (14s) and b) create a discharge circuit of around .75 - 1.0 amps
ESP32:https://learn.sparkfun.com/tutorials/esp32-thing-hookup-guide
How to read multiple analog Read sensors (should apply to voltage readings i think):https://forums.adafruit.com/viewtopic.php?f=25&t=11597&start=60
Discharge circuit:
Good idea?has any one tried these methods or have had success/failures?