cadric
Member
- Joined
- May 3, 2018
- Messages
- 110
Hi,
I got some e-bike Batteries with 36V(10S6P) I want to start building my PW with.
As some of you already mentioned and I already found out myself, taking them apart is not easy.
So I plan to use them as they are besides the fact that I think this will be my main source of Batteries.
As I'm still in the process of planing I now see two possible setups:
1. I add 4S6P Cell Blocks to upgrade to 14S6P for 48Volt systems( which I already tried successfull on one example Battery)
2. If possible change the settings in the PIP 5048MS to use them as 36V
The quesion is: is this possible with a mppSolar PIP-5048MS?
As I have two of them, can I then use one for 36V ( from e-Bike Batteries) and the other for a 48Volt system build from my collected Laptop cells?
regards
cadric
I got some e-bike Batteries with 36V(10S6P) I want to start building my PW with.
As some of you already mentioned and I already found out myself, taking them apart is not easy.
So I plan to use them as they are besides the fact that I think this will be my main source of Batteries.
As I'm still in the process of planing I now see two possible setups:
1. I add 4S6P Cell Blocks to upgrade to 14S6P for 48Volt systems( which I already tried successfull on one example Battery)
2. If possible change the settings in the PIP 5048MS to use them as 36V
The quesion is: is this possible with a mppSolar PIP-5048MS?
As I have two of them, can I then use one for 36V ( from e-Bike Batteries) and the other for a 48Volt system build from my collected Laptop cells?
regards
cadric